CLI Guide

• On 12G and later systems: read-only
Description
Displays the voltage of the main memory.
Example:
A:>syscfg --SysMemVolt
Applicable Systems PowerEdge 12G and later systems.
VideoMem*
Table 83. VideoMem*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the total amount of video memory available to the embedded video controller.
Example:
A:>syscfg --VideoMem
Applicable Systems PowerEdge 12G and later systems.
ClusterOnDie
Table 84. ClusterOnDie
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: Enabled, Disabled
Description Enables or disables the Cluster On Die option. When enabled, the feature enhances the
performance of the system with two caching agents.
A:>syscfg --ClusterOnDie=Enabled
ClusterOnDie=Enabled
Applicable Systems PowerEdge 12G and later systems
RedundantOsLocation
Table 85. RedundantOsLocation
Valid Arguments
• On systems prior to 14G: NA
Description
Species the backup device for the Redundant OS Control feature. When Redundant
OS Boot is set to Enabled, the BIOS will boot to this device.
NOTE: In order for the devices and slots listed below to show up as optional
backup devices, their settings must be as shown:
SD Card Port -- On
Internal USB Port -- On
Embedded SATA -- anything other than Off
PCIe Slot Disablement -- Enabled
Example:
A:>syscfg --RedundantOsLocation
Applicable Systems
PowerEdge 14G and later systems.
Miscellaneous Settings
You can manage the miscellaneous settings using the options in this group.
59