CLI Guide

SysMemSize/mem*
Table 78. SysMemSize/mem*
Valid Arguments
• On systems prior to 12G: read-only
• On 12G and later systems: read-only
Description
Displays the amount of main memory in the system.
Example:
A:>syscfg --mem
mem=500
Applicable Systems PowerEdge 11G and later systems.
SnoopMode/snooplter
Table 79. SnoopMode/snooplter
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the snoop lter option from the system BIOS.
Example:
A:>syscfg --snoopfilter=enable
snoopfilter=enable
Applicable Systems All PowerEdge systems.
SysMemSpeed*
Table 80. SysMemSpeed*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the clock frequency of the main memory.
Example:
A:>syscfg --SysMemSpeed
Applicable Systems PowerEdge 12G and later systems.
SysMemType*
Table 81. SysMemType*
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the type of main memory installed in the system.
Example:
A:>syscfg --SysMemType
Applicable Systems PowerEdge 12G and later systems.
SysMemVolt*
Table 82. SysMemVolt*
Valid Arguments
• On systems prior to 12G: NA
58