CLI Guide
HttpDev<n>VlanEnDis
Table 68. HttpDev<n>VlanEnDis
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: Enabled, Disabled
Description Set the eld to Enabled if your DNS or HTTP servers reside on a Virtual LAN (VLAN).
The value of n in HttpDevnVlanEnDis can be from 1 to 4.
Example:
A:>syscfg --HttpDev3VlanEnDis=Enabled
HttpDev3VlanEnDis=Enabled
Applicable Systems PowerEdge 14G and later systems
HttpDev<n>VlanId
Table 69. HttpDev<n>VlanId
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: Enabled, Disabled
Description When VLAN is enabled, identies which of the 4094 possible VLANs contains the
desired DNS or HTTP servers. This value can be 1 – 4094 inclusive. Where n is from 1
to 4.
Example:
A:>syscfg --HttpDev2VlanId=Enabled
Applicable Systems PowerEdge 14G and later systems
Memory Settings
You can manage the memory-related conguration settings using the objects in this group.
CorrEccSmi/memprefailurenotify
Table 70. CorrEccSmi/memprefailurenotify
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the Correctable ECC SMIs. When enabled, the SMIs report the
Correctable ECC errors.
This option can be replicated.
Example:
A:>syscfg --CorrEccSmi=Enabled
CorrEccSmi=Enabled
Applicable Systems PowerEdge 12G and later systems
DynamicCoreAllocation
Table 71. DynamicCoreAllocation
Valid Arguments
• On systems prior to 12G: NA
55