CLI Guide

• On 12G and later systems: <integer>
Description
Sets the virtual LAN (VLAN) of the PXE device.
NOTE: The value of n in PxeDevnVlanId can be 1–4.
Example:
A:>syscfg --PxeDev1VlanId=XXXX
Applicable Systems PowerEdge 12G and later systems
PxeDev n VlanPriority
Table 65. PxeDev n VlanPriority
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: <integer>
Description
Sets the virtual LAN (VLAN) priority of the PXE device.
NOTE: The value of n in PxeDevnVlanPriority can be 1–4.
Example:
A:>syscfg --PxeDev1VlanPriority=X
PxeDev1VlanPriority=X
Applicable Systems PowerEdge 12G and later systems
HttpDev<n>Interface
Table 66. HttpDev<n>Interface
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: NIC.Integrated.1-1-1, NIC.Integrated.1-2-1, NIC.Integrated.
1-3-1, NIC.Integrated.1-4-1
Description The NIC interface used for HTTP device. The value of n in HttpDevnInterface can
be from 1 to 4.
Example:
A:>syscfg --HttpDev1Interface=NIC.Integrated.1-2-1
HttpDev1Interface=NIC.Integrated.1-1-1
Applicable Systems PowerEdge 14G and later systems
HttpDev<n>Protocol
Table 67. HttpDev<n>Protocol
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: IPv4, IPv6
Description Determines whether the Internet Protocol version 4 older version or the Internet
Protocol version 6 the newest version is used for this device. The value of n in
HttpDevnProtocol can be from 1 to 4.
Example:
A:>syscfg --HttpDev2Protocol=IPv4
HttpDev2Protocol=IPv4
Applicable Systems PowerEdge 14G and later systems
54