CLI Guide

Example:
A:>syscfg --Usb3Setting=Auto
Usb3Setting=Auto
Applicable Systems
All systems prior to PowerEdge 13G systems
CurrentEmbVideoState
Table 49. CurrentEmbVideoState
Valid Arguments
• On systems prior to 12G: NA
• On 12G and later systems: read-only
Description
Displays the current state of the Embedded Video Controller.
Example:
A:>syscfg --CurrentEmbVideoState
CurrentEmbVideoState=xxx
Applicable Systems PowerEdge 12G and later systems
InternalSdCardPrimaryCard
Table 50. InternalSdCardPrimaryCard
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: SdCard1, SdCard2
Description
Sets an internal SD card as the primary SD card.
A:>syscfg --InternalSdCardPrimaryCard=SdCard1
InternalSdCardPrimaryCard=SdCard1
IscsiDev1Con< n> ChapType
Table 51. IscsiDev1Con<
n> ChapType
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: OneWay, Mutual
Description
Sets the Challenge Handshake Authentication Protocol (CHAP) type of the iSCSI
connection. Where the value of n in IscsiDev1ConnChapType can be 1 or 2.
Example:
A:>syscfg --IscsiDev1Con1ChapType=Mutual
IscsiDev1Con1ChapType=Mutual
Applicable Systems PowerEdge 14G and later systems
IscsiDev1Con <n> DhcpEnDis
Table 52. IscsiDev1Con
<n> DhcpEnDis
Valid Arguments
• On systems prior to 14G: NA
• On 14G and later systems: Enabled, Disabled
Description
Enables or disables the Dynamic Host Conguration Protocol (DHCP) of the iSCSI
connection. Where the value of n in IscsiDev1ConnDhcpEnDis can be 1 or 2.
Example:
A:>syscfg --IscsiDev1Con1DhcpEnDis=Enabled
IscsiDev1Con1DhcpEnDis=Enabled
Applicable Systems PowerEdge 14G and later systems
50