CLI Guide

Example:
A:>syscfg --integratedraid=disable
integratedraid=disable
Applicable Systems All PowerEdge systems.
IntegratedSas/integratedsas
Table 38. IntegratedSas/integratedsas
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the integrated SAS controller. This option can be replicated.
Example:
A:>syscfg --integratedsas=enable
integratedsas=enable
Applicable Systems All PowerEdge systems.
InternalSdCard/embsdcard
Table 39. InternalSdCard/embsdcard
Valid Arguments
• On systems prior to 12G: on, o
• On 12G and later systems: On, O
Description
Enables or disables the embedded SD card port.
Example:
A:>syscfg --embsdcard=off
embsdcard=off
Applicable Systems All PowerEdge systems
InternalSdCardRedundancy/embsdcardredundancy
Table 40. InternalSdCardRedundancy/embsdcardredundancy
Valid Arguments
• On systems prior to 12G: mirrormode, disable
• On 12G and later systems: Mirror, Disabled
Description
Sets the internal SD card port redundancy to Mirror mode or Disabled.
When set to Mirror mode, read-write operation occurs on both the secure digital
(SD) cards. When one of the SD cards fails and is replaced, on booting, the data of the
active card is copied to the oine card.
When set to Disabled, read-write operation occurs only on SD card 1.
NOTE: On Blade systems, disable the vash key to congure this option.
Example:
A:>syscfg --embsdcardredundancy=mirrormode
embsdcardredundancy=mirrormode
Applicable Systems All PowerEdge systems
47