CLI Guide

EmbNic3Nic4/embnic3nic4
Table 31. EmbNic3Nic4/embnic3nic4
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled, DisabledOs
Description
Enables or disables the operating system interface of the third and fourth embedded
NIC controllers.
Example:
A:>syscfg --EmbNic3Nic4=enable
--embnic3nic4=enable
Applicable Systems PowerEdge 11G and later systems
EmbNic4/embnic4
Table 32. EmbNic4/embnic4
Valid Arguments
• On systems prior to 12G: on, o, onnopxe, onwithiscsi
• On 12G and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled
Description
Turns the fourth embedded NIC on with PXE enabled, o, or on without PXE enabled.
This option is only valid for supported systems that have four embedded NICs. If the
fourth NIC is enabled without PXE, it is not found in the boot order. If the fourth NIC is
turned on with PXE, it is placed at the end of the boot order. The onnopxe argument is
not supported on all systems. This option can be replicated.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI server.
The embnic4 option can be replicated.
Example:
A:>syscfg --embnic4=onnopxe
embnic4=onnopxe
Applicable Systems All PowerEdge systems
EmbVideo/embvideoctrl
Table 33. EmbVideo/embvideoctrl
Valid Arguments
• On systems prior to 12G: enable, disable
• On 12G and later systems: Enabled, Disabled
Description
Enables or disables the BIOS support for the Embedded Video Controller
Example:
A:>syscfg --embvideoctrl=enable
embvideoctrl=enable
Applicable Systems PowerEdge 11G and later systems
IoatEngine/ioat
Table 34. IoatEngine/ioat
Valid Arguments
• On systems prior to 12G: enable, disable
45