CLI Guide

in which they are congured. When set to o, only the rst device in the hard disk
sequence is attempted. This option can be replicated.
Example:
A:>syscfg --hddfailover=on
hddfailover=on
Applicable Systems All systems except PowerEdge 12G systems.
SetBootOrderFqdd n
Table 25. SetBootOrderFqdd n
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: <string>
Description
Displays the list of FQDDs representing the boot list to be applied on the next boot.
NOTE: The value of n in SetBootOrderFqdd n can be 1–16.
Example:
A:>syscfg --SetBootOrderFqdd1=xxxx,yyy,zzzz
SetBootOrderFqdd1=xxxx,yyy,zzzz
Applicable Systems PowerEdge 13G and later systems
SetLegacyHddOrderFqdd n
Table 26. SetLegacyHddOrderFqdd
n
Valid Arguments
• On systems prior to 13G: NA
• On 13G and later systems: <string>
Description
Displays the list of FQDDs representing the legacy hard-disk drive list to be applied on
the next boot.
NOTE: The value of n in SetLegacyHddOrderFqdd n can be 1–16.
Example:
A:>syscfg --SetLegacyHddOrderFqdd1=xxxx,yyy,zzzz
SetLegacyHddOrderFqdd1=xxxx,yyy,zzzz
Applicable Systems PowerEdge 13G and later systems
Integrated Devices
You can use the options in this group to manage the integrated devices such as internal NIC and integrated USB.
EmbNic1/embnic1
Table 27. EmbNic1/embnic1
Valid Arguments
• On systems prior to 12G: on, o, onnopxe, onwithiscsi
• On 12G and later systems: Enabled, EnabledPxe, EnablediScsi, Disabled
Description
Turns the rst embedded NIC on with PXE on, o, or on without PXE enabled. This
option is only valid for supported systems that have a NIC. If the NIC is enabled without
PXE, it is not found in the boot order. If the NIC is turned on with PXE, it is placed at
the end of the boot order. The onnopxe argument is not supported on all systems.
The onwithiscsi argument enables the embedded NIC to boot from the iSCSI server.
The embnic1 option can be replicated.
43