CLI Guide
Error Code Message
34 Error: fdisk failed.
UPINIT Windows PE-Specic Error Codes And Messages
The list of error codes and messages below are specic to the Windows PE environment.
Table 375. UPINIT Windows PE-Specic Error Codes and Messages
Error Code Message
31 Error: DISKPART failed.
32 Error: DISKPART command file not found.
RAIDCFG Error Codes And Messages
The RAIDCFG utility checks your commands for correct syntax when you enter them. When you enter a command, a message
displays stating the results of the command.
Failure Messages
The RAIDCFG utility failure messages provide error codes to help diagnose why some commands do not succeed. See table below
for a list of the error codes and the associated messages.
Table 376. RAIDCFG Error Codes and Messages
Error Code Message
0 RAIDCFG Command successful!
1 Error! Incorrect Syntax.
2 Failure!
3 Illegal operation
4 Unsupported operation
5 Device not found.
6 Format boot drive illegal
7 Buffer too small.
8 Virtual Disk contains boot partition. Use force option to delete.
9 Init boot drive failed.
10 Format boot drive failed.
11 Cannot write boot drive.
12 Unsupported RAID value.
13 Invalid RAID configuration.
14 Span depth not in range.
15 RAID 1 failed.
16 Exactly 2 array disks are required to create a RAID 1 virtual disk.
17 Unsupported stripe size value.
196