CLI Guide
Failure Messages Solutions
System Services and/or CSIOR
disabled.
Enable CSIOR from <F2> screen.
UPINIT Common Error Codes And Messages
The UPINIT utility checks your commands for correct syntax. When you enter a command, a message is displayed stating the results
of the command.
Failure Messages
The UPINIT utility failure messages provide error codes to help diagnose why some commands do not succeed. Table below lists
error codes and messages common to Linux and Microsoft Windows PE environments.
Table 373. UPINIT Common Error Codes and Messages
Error Code Message
0 Dell Utility Partition created successfully.
1 Error: Disk ID not specified.
2 Error: SIZE not specified.
3 Error: Utility Partition Image file not specified.
4 Error: DRMK Path not specified.
5 Error: Dell Utility Partition already exits. Please use --overwrite
option to upgrade or overwrite.
6 Error: Partitions exists. Please clear all the partitions before running
upinit.sh.
7 Error: DOS file(s) not found at the specified path.
8 Error: UP IMAGE not found at the specified location.
9 Error: format failed.
10 Error: Invalid size. Size should be a number between 32 and 2000.
11 Error: sysdrmk failed.
12 System Error.
13 Error: Invalid Argument: <argument>
14 Error: Unzip failed.
UPINIT Linux-Specic Error Codes And Messages
The list of error codes and messages are specic to the Linux environment.
Table 374. UPINIT Linux-Specic Error Codes and Messages
Error Code Message
31 Error: Invalid disk specified.
32 Error: Mount failed.
33 Cannot create mount point <mount point>.File exists
195