CLI Guide

Mandatory Options and
Arguments
Optional Parameters Valid Parameters
Arguments
Description
setenvironment
envname=<string>
envcommand=<function
>
controllerid=id
getfreeadisksize, or gethotspares
function call. This option combination is
mandatory.
Example:
A:>raidcfg -se -envn=FIRMWARE
-envc=getfirmware -c=2
FIRMWARE=531T
RAIDCFG Command successful!
Function Calls of Setenvironment Option
The following table lists the function calls of the setenvironment option.
Table 345. Function Calls of the setenvironment Option
Function Call Description
getfirmware
Returns the rmware version of the specied controllers.
Example:
A:>raidcfg -se -envn=FIRMWARE -envc=
getfirmware -c=2
FIRMWARE=531T
RAIDCFG Command successful!
getcontrollertype
Returns LSI for LSI controllers and ADAP for Adaptec controllers.
Example:
A:>raidcfg -se -envn=CONTROLLERTYPE -envc=
getcontrollertype -c=2
CONTROLLERTYPE=LSI
RAIDCFG Command successful!
getadisks
Returns the array disks attached to the controller.
Example:
A:>raidcfg -se -envn=ADISKS -envc=getadisks -c=2
ADISKS=0:0:1,0:1:1,0:2:1
RAIDCFG Command successful!
getfreeadiskcount
Returns the number of free array disks found in the specied controller.
Example:
A:>raidcfg -se -envn=FREEADISKCOUNT -envc=
getfreeadiskcount -c=2
FREEADISKCOUNT=2
RAIDCFG Command successful!
getfreeadisksize
Returns the total size of the free array disks in megabytes.
Example:
A:>raidcfg -se -envn=FREEADISKSIZE -envc=
getfreeadisksize -c=2
FREEADISKSIZE=15346
RAIDCFG Command successful!
gethotspares
Returns the global hot spares (global failover disks) found on the specied controller.
169