CLI Guide

Option Parameters Valid Arguments Description
This option is optional and can be added to the
command line in any order.
Example:
A:>raidcfg -h
RAIDCFG v5
Copyright (c) 2002-2014 Dell Inc.
[raidcfg]
Help: options in <> are mandatory
and options in [] are optional and
can be in any order after
mandatory ones.
raidcfg -h
Provides users with general help
options that may be used with this
utility.
Enumerating RAID Controllers
The following table lists the RAIDCFG options, parameters, and pre-dened arguments for enumerating RAID controllers.
Table 334. Enumerating RAID Controllers
Mandatory Options
and Arguments
Optional Parameters Valid Parameters
Arguments
Description
-ctrl or
controller
NA NA
Lists all the RAID controllers on the host system, along
with select property information. This option is
mandatory
Example:
raidcfg -ctrl
Controller_ID/Slot_ID: 4
Controller_PCI_ID: 9:0:0
Controller_Name: PERC H710P Adapter
Channels: 2
No.of Virtual_Disks: 17
Array_Disks:
0:0:1,0:1:1,0:2:1,0:3:1,0:4:1,0:5:1,
0:6:1, 0:7:1
Persistent Hot Spare: Disabled
Firmware Version: 21.2.0-007
Controller_Boot_Mode: 2 (Headless
continue on error)
Enable_Auto_Import: No
T10 Protection Info Capable: No
RAIDCFG Command successful!
-c or
controllerid
<valid
controller ID
number>
Displays the properties for the RAID controller with the
specied controller ID. This option combination is
mandatory.
Example:
raidcfg -ctrl -c=31
Controller_ID/Slot_ID: 31
Controller_PCI_ID: 7:0:0
Controller_Name: PERC FD33xS
Channels: 1
No.of Virtual_Disks: 1
Array_Disks:
0:0:1,0:2:1,0:3:1,0:4:1,0:7:1,0:8:1,0:1
156