CLI Guide

Option Sub-option Valid Arguments Description
--solcharaccuminterval 1–255
Sets the Character Accumulate Interval in 5–
ms increments (1–255). This sets the typical
amount of time that the BMC waits before
transmitting a partial SOL character data
packet. This option can be replicated.
--solcharsendthreshold 1–255
Species that the BMC automatically sends an
SOL character data packet containing this
number of characters in increments of 5 (1–
255) as soon as this number of characters (or
greater) has been accepted from the
baseboard serial controller into the BMC. This
option can be replicated.
--solbitrate
9600, 19200
Sets the serial channel communication bit rate
(in bps) with the BMC when SOL is activated.
This option can be replicated.
NOTE: The arguments for
solbitrate vary with various Dell
systems. If an argument valid for a
particular Dell system is entered for
another system, the Parameter out
of range error is displayed.
Example 1 (to display the current SOL
conguration):
A:>syscfg solcfgparams
solcfgparams solenable=enable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=25
solbitrate=9600
Example 2 (to set the SOL conguration
parameters):
A:>syscfg solcfgparams
--solenable=disable
--solprivlevel=administrator
--solcharaccum interval=25
--solcharsend threshold=100
--solbitrate=9600 solcfgparams
solenable=disable
solprivlevel=administrator
solcharaccum interval=25
solcharsend threshold=100
solbitrate=9600
ssninfo
Table 324. ssninfo
Option Sub-option Valid Arguments Description
ssninfo
Displays information about the number of possible
active sessions and the number of currently active
sessions on all channels on the BMC. This option
cannot be replicated.
NOTE: All PowerEdge systems prior to
PowerEdge 12G systems.
--maxactivessns
NA Displays the maximum possible active BMC sessions.
This sub-option cannot be replicated.
139