CLI Guide

Option Sub-option Valid Arguments Description Applicable Systems
replicated. This sub-option is
dependent on the alertpolnum
sub-option.
Example: (to set the PEF conguration
parameters):
Example 1 (To congure the PEF so
that the system is powered down in
response to a fan failure event):
A:>syscfg pefcfgparams --
filter= fanfail--
filteraction=powerdown
pefcfgparams
filter=fanfail
filteraction=powerdown
Example 2 (To congure the PEF so
that a PEF alert is not sent to the
destination IP address in response to a
chassis intrusion event):
A:>syscfg pefcfgparams --
filter= intrusion--
filteralert=disable
pefcfgparams filter=
intrusion
filteralert=disable
powerbutton
Table 315. powerbutton
Option Sub-option Valid Arguments Description
--powerbutton
NA
enable, disable
Enables or disables the power button. This option
can be replicated.
Example:
A:>syscfg --powerbutton=enable
powerbutton=enable
powerctl
Table 316. powerctl
Option Sub-option Valid Arguments Description
--powerctl
NA
powerdown
Performs a chassis powerdown and controls the
reset of the system.
Powerdown turns o the system.
powercycle
Turns o the system and automatically turns on
your system after a few seconds.
reset
Resets the system.
softshutdown
In Linux, the system turns o immediately.
NOTE: In Windows PE, this option does not
work.
134