CLI Guide

loaddefaults*
Table 309. loaddefaults*
Option Sub-option Valid Arguments Description
--loaddefaults*
NA NA
Restores the BMC to the defaults originally loaded
on the controller. This option is used to return the
BMC to a known-good state. This option cannot be
replicated.
NOTE: The NMI, power button, and SOL
defaults are not reset by using this option.
Example:
A:>syscfg --loaddefaults
Loading defaults...
nextboot
Table 310. nextboot
Option Sub-option Valid Arguments Description
--nextboot or --
OneTimeBootSeqDev
NA valid device name
(from the bootseq
option device list)
Sets the specied device as the rst device in
the boot order for the next boot cycle only. The
device must be a device from the bootseq
option device list. Run the bootseq option to
see a list of available device names. For more
information, see
--bootseq. This option is not
replicated.
Example 1:
A:>syscfg --bootseq
Device 1: floppy.emb.0 -
Diskette Drive A:
Device 2: cdrom.emb.0 - CD-ROM
device
Device 3: hdd.emb.0 - Hard Drive
C:
Device 4: nic.emb.1 - Intel Boot
Agent Version 4.0.17
Device 5: nic.emb.2 - Intel Boot
Agent Version 4.0.17
Example 2:
A:>syscfg --nextboot=nic.emb.1
nextboot=nic.emb.1
nmibutton
Table 311. nmibutton
Option Sub-option Valid Arguments Description
--nmibutton
NA
enable, disable
Enables or disables the NMI button. This option
can be replicated.
130