CLI Guide

Group SYSCFG Commands Equivalent RACADM Commands

--sataportjmodel BIOS.SataSettings.SataPortJModel

--sataportjdrivetyp BIOS.SataSettings.SataPortJDriveType

--sataportjcapacity BIOS.SataSettings.SataPortJCapacity

Serial Communication --ConTerrmType BIOS.SerialCommSettings.ConTermType

--ExtSerialConnector BIOS.SerialCommSettings.ExtSerialConnector

--FailSafeBaud BIOS.SerialCommSettings.FailSafeBaud

--RedirAfterBoot BIOS.SerialCommSettings.RedirAfterBoot

Slot Disablement --Slotn BIOS.SlotDisablement.Slotn

System Information --svctag BIOS.SysInformation.SystemServiceTag

System Security --AcPwrRcvryDelay BIOS.SysSecurity.AcPwrRcvryDelay

--PwrButton BIOS.SysSecurity.PwrButton

--SetupPassword BIOS.SysSecurity.SetupPassword

--SysPassword BIOS.SysSecurity.SysPassword

System Power --maxpowercap System.Power.Cap.MaxThreshold

--minpowercap System.Power.Cap.MinThreshold

--capenable System.Power.Cap.Enable

Supported Systems

For a complete list of supported Dell PowerEdge systems, see the Dell Systems Software Support Matrix in the required version of

OpenManage Software at dell.com/openmanagemanuals

Supported operating systems

DTK utilities support Windows PE 10.0 (64-bit), and Windows PE 5.1 (64-bit) to deploy the following operating systems in BIOS and

UEFI mode:

• Microsoft Windows Server 2012 R2 Foundation, Essentials, Standard, and Datacenter editions

• Microsoft Windows Server 2016 Foundation, Essentials, and Standard editions

• Dell’s Precision R7920 Supported operating systems

– Microsoft Windows 8.1 (64-bit)

– Microsoft Windows 10 (64-bit)

For Linux, the DTK utilities support deploying the following operating systems in BIOS and UEFI mode:

• SUSE Linux Enterprise Server 12 SP2 (64-bit)

• Red Hat Enterprise Linux 7.3 (64-bit)

• Red Hat Enterprise Linux 6.9(64-bit)

You can install the DTK Linux RPM utilities on the following operating systems in BIOS and UEFI mode:

• SUSE Linux Enterprise Server 12 SP2 (64-bit)

• Red Hat Enterprise Linux 7.3 (64-bit)