CLI Guide

idracversion
Table 301. idracversion
Option Sub-option Valid Arguments Description
--idracversion
Displays the version information for the iDRAC
and the iDRAC rmware. This option cannot be
replicated.
--devid
NA
Reports the iDRAC device ID.
--devrevision
NA
Reports the iDRAC device revision.
--majorfwversion
NA
Reports the major rmware revision of iDRAC.
--minorfwversion
NA
Reports the minor rmware revision of iDRAC.
A:>syscfg --idracversion
devid=32
devrevision=0
majorfwversion=0
minorfwversion=40
kvmstatusonlcd
Table 302. kvmstatusonlcd
Option Sub-option Valid
Arguments
Description Applicable Systems
--
kvmstatusonlcd
NA
active,
inactive
Congures the Dell Virtual KVM (vKVM)
session status on the LCD.
Example:
A:>syscfg --kvmstatusonlcd=active
kvmstatusonlcd=active
PowerEdge 11G
systems
lancfgparams
Table 303. lancfgparams
Option Sub-option Valid Arguments Description
lancfgparams or
lcp
Congures and displays LAN conguration
parameters. This option can be replicated.
--ipaddrsrc static, dhcp
Sets the IP address source for the LAN channel.
This sub-option can be replicated.
--ipaddress <ipaddress>
Sets the IP address for the LAN channel. This
sub-option cannot be replicated.
--subnetmask <subnetmask>
Sets the subnet mask for the LAN channel. This
sub-option can be replicated.
--gateway <gateway>
Sets the gateway for the LAN channel. This
sub-option can be replicated.
--commstring <string>
Sets the community string (maximum of 16
printable ASCII characters) used in a platform
event trap (PET). This sub-option can be
replicated.
125