CLI Guide

set to legacy, USB keyboards and mice are supported through the BIOS to function in
operating systems that do not natively support USB. This option can be replicated.
Example:
A:>syscfg --usb=on
usb=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
usbash
Table 298. usbash
Valid Arguments auto, fdd, hdd
Description
Sets or reports the emulation for an USB ash device. The USB ash device can be set
to emulate a hard drive (HDD) or a diskette drive (FDD). This option can be replicated.
Example:
A:>syscfg --usbflash=auto
usbflash=auto
Applicable Systems All systems prior to PowerEdge 12G systems.
vash
Table 299.
vash
Valid Arguments enable, disable
Description
Enables or disables vash on iDRAC.
Example:
A:>syscfg --vflash=enable
vflash=enable
Applicable Systems All PowerEdge 11G systems or systems with iDRAC6
identify
Table 300. identify
Valid Arguments 0–254
Description
Flashes the identication LED for a specied number of seconds.
NOTE: Use 0 to stop the blinking of the LED.
Example:
A:>syscfg --identify=10
identify=10
Applicable Systems All PowerEdge 11G systems with a BMC
124