CLI Guide

Example:
A:>syscfg --idecdrom=auto
idecdrom=auto
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
idracgui
Table 281. idracgui
Valid Arguments enable, disable
Description
Enables and disables the iDRAC GUI. This option can be replicated.
Example:
A:>syscfg --idracgui=disable
idracgui=disable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
lpt
Table 282. lpt
Valid Arguments lpt1, lpt2, lpt3, disable
Description
Congures or reports the I/O address of the LPT (parallel) port. This option is available
on all supported systems with an LPT port. This option is recorded to an output le for
replication.
Example:
A:>syscfg --lpt=lpt1
lpt=lpt1
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
memdynamicpower
Table 283. memdynamicpower
Valid Arguments enable, disable
Description
Enables or disables the dynamic memory power states. This option can be replicated.
Example:
A:>syscfg --memdynamicpower=enable
memdynamicpower=enable
Applicable Systems PowerEdge systems with Intel Xeon 7500 series
memintleave
Table 284. memintleave
Valid Arguments enable, disable
Description
Enables or disables the memory interleave mode. This option can be replicated.
119