CLI Guide

Option Sub-option Valid Arguments Description
The hexadecimal number entered as an argument
is case insensitive although the value returned by
the encryptkey option is always in uppercase.
The value returned is appended with zeroes so
that it is always 40 characters long.
Example:
A:>syscfg -- encryptkey=abcd
encryptkey= ABCD00000000000
000000000000000 0000000000
berchannel
Table 274. berchannel
Valid Arguments enable, disable
Description
Enables or disables embedded ber channel. This option can be replicated.
Example:
A:>syscfg --fiberchannel=enable
fiberchannel=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
oppy
Table 275.
oppy
Option
--floppy
Valid Arguments auto, o, readonly
Description
Sets the diskette drive controller to auto, o, or readonly. This option is available on all
supported systems that have a supported diskette drive. This option can be replicated
Example:
A:>syscfg --floppy=auto
floppy=auto
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems.
formfactor
Table 276. formfactor
Valid Arguments read-only
Description
Displays the geometry of PowerEdge Blade systems. The option can have the following
values: halfheight (the Blade systems occupies 1 slot of the chassis), halfheight,
dualwide (the Blade system occupies 2 horizontal slots of the chassis), fullheight (the
Blade system occupies 2 vertical slots of the chassis), fullheight, dualwide (the Blade
system occupies 4 slots of the chassis) and quarterheight (the Blade systems occupies
half slot of the chassis).
Example:
A:>syscfg --formfactor=fullheight, dualwide
formfactor=fullheight, dualwide
Applicable Systems
All PowerEdge blade systems prior to PowerEdge 12G systems.
117