CLI Guide

Option Sub-option Arguments Description
--valsetuppwd
<string>
Validates the setup password for power authentication. If
you try to change the DTK settings, you are prompted to
enter this password to access the settings. For more
information on delimiters, see Command Line Option
Delimiters.
A:>syscfg power --profile=
maxperformance --valsetuppwd=
<setup_password>
--
setuppwdoverride
NA
Does not prompt you for a password to access the DTK
settings on systems that do not have a setup password
congured.
A:>syscfg power --profile=
maxperformance –setuppwdoverride
Sub Options And Arguments For tcm Option
Table 266. Sub Options And Arguments For tcm Option
Option Sub-option Arguments Description
tcm --tcmsecurity
o Does not report the presence of TCM to the operating
system.
on
Reports the presence of TCM to the operating system.
Example:
A:>syscfg tcm --tcmsecurity=off
--tcmactivation
enabled Enables and activates the TCM feature.
disabled Disables and deactivates the TCM feature.
nochange
Does not alter the operational state of the TCM feature.
Example:
A:>syscfg tcm --tcmactivation=enabled
--tcmclear
NA Clears the contents of the TCM chip without erasing the
tcmsecurity and tcmactivation settings.
Example:
A:>syscfg tcm --tcmactivation=enabled
--tcmclear --setuppwdoverride
--tcmundoclear
NA
Cancels the result of the tcmclear setting.
Example:
A:>syscfg tcm --tcmactivation=enabled
--tcmundoclear --setuppwdoverride
Sub Options And Arguments For tpm Option
The following table lists the sub-options and arguments for the tpm option.
113