CLI Guide

coreperformanceboost
Table 248. coreperformanceboost
Valid Arguments enable, disable
Description
Enables or disables the AMD Core Performance Boost feature. When enabled, it allows
higher performance power states if additional power is available to the CPU. This option
can be replicated.
Example:
A:>syscfg --coreperformanceboost=enable
coreperformanceboost=enable
Applicable Systems PowerEdge R715, R815, R515, R415, and M915 systems with AMD Opteron 6000 series
processor
dbpm
Table 249. dbpm
Valid Arguments enable, disable
Description
Enables or disables demand-based power management. This option can be replicated.
Example:
A:>syscfg --dbpm=enable
dbpm=enable
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embhypervisor
Table 250. embhypervisor
Valid Arguments o, on
Description
Turns on or o the embedded hypervisor port.
Example:
A:>syscfg --embhypervisor=on
embhypervisor=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embideraid
Table 251. embideraid
Valid Arguments on, o
Description
Turns on or o the embedded IDE RAID controller. This option is only valid for
supported systems that have IDE ROMB. This option can be replicated.
Example:
A:>syscfg --embideraid=on
embideraid=on
Applicable Systems All PowerEdge systems prior to PowerEdge 12G systems
embnic1pxe
Table 252. embnic1pxe
Valid Arguments enable, disable
Description
Enables or disables Preboot Execution Environment (PXE) on the rst embedded NIC.
If PXE is disabled, the rst NIC is not found in the boot order. If PXE is enabled, the rst
108