CLI Guide

TpmPpiBypassProvision
Table 239. TpmPpiBypassProvision
Valid Arguments
• On systems prior to 14G: N/A
• On 14G and later systems: Enabled, Disabled
Description
When set to Enabled, allows the Operating System to bypass Physical Presence
Interface (PPI) prompts when issuing PPI Advanced Conguration and Power Interface
(ACPI) provisioning operations.
Example:
A:>syscfg --tpmPpiByPassProvision=Enabled
tpmPpiBypassProvision=Enabled
Applicable Systems 14G PowerEdge systems.
UEFI Boot Settings
You can manage the UEFI settings using the options in this group.
UeBootSeq
Table 240. UeBootSeq
Valid Arguments
• On systems prior to 12G
: NA
• On 12G and later systems
: list of device names separated by commas
Description
Enables, disables, and orders the devices in a UEFI boot order list. Only the devices
present on the system are listed in the UeBootSeq. The rst option in the list is
attempted rst. If the rst option is not successful, the second option is attempted, and
so on. The system attempts to launch only the enabled boot options and does not
launch disabled boot options. This option is applicable when bootmode is set to UEFI
and has no eect when bootmode is set to BIOS.
NOTE: Only the devices listed in the bootseq are enabled.
Applicable Systems All PowerEdge 12 and later systems.
DTKTORACADM
The DTK SYSCFG deployment scripts are converted to equivalent RACADM scripts, that helps in migration to utilize RACADM in the
deployment solution. The utility has the conversion tool for converting the SYSCFG scripts in both environments: Microsoft
Windows and Linux operating systems. Starting 12th generation of PowerEdge servers and later, selected set of SYSCFG commands
are a part of the DTK sample scripts. The list of DTK sample scripts are present in \Toolkit\Tools\CONVERTER\windows_scripts.lst
for Microsoft Windows operating systems and toolkit/Converter/ linux_scripts.lst for Linux operating system. The converted scripts
are available in the folder racscripts.
Table 241. DTKTORACADM Command on Windows Operating System
Valid Arguments dtktoracadm.exe or dtktoracadm.exe windows_scripts.lst debug
Description On systems running Windows operating system, run the command, where windows_scripts.lst is
the input le which contains the list of path to run the RACADM scripts and debug is an option
which list the le status.
Applicable Systems
All PowerEdge 12 and later systems.
102