CLI Guide

Table 188. SerialPortAddress / serialportaddrsel (continued)
Description
Sets the port address of the serial devices.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
default, Serial Device 1 is set to COM port 1 and Serial Device 2 is set to COM port
2.
On systems prior to Dell’s 12th generation PowerEdge systems, when this option is
alternate, Serial Device 1 is set to COM port 2 and Serial Device 2 is set to COM
port 1.
This option can be replicated.
Example:
A:>syscfg --serialportaddrsel=default
serialportaddrsel=default
Applicable Systems Dell’s 11th generation PowerEdge and later systems
Slot Disablement
You can manage the slot disablement settings using the options in this group.
Slot n
Table 189. Slot
n
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled,
BootDriverDisabled
Description
Controls the configuration of the installed card in the specified slot.
NOTE: The value of n in Slotn can be 1–10.
Example:
A:>syscfg --Slot1=Enabled
Slot1=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
Slot n Bif
Table 190. Slot
n Bif
Valid Arguments
● On systems prior to 14G: NA
● On 14G: x16, x4, x8, x4x4x8, x8x4x4
Description
Controls the configuration of the installed card in the specified slot. Where the value
of n in Slotn can be 1 or 2.
Example:
A:>syscfg --Slot1Bif=x8
Applicable Systems PowerEdge 14G and later systems
SYSCFG 99