CLI Guide

Table 155. SataPortDCapacity (continued)
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortDCapacity
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortDDriveType*
Table 156. SataPortDDriveType
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
This option indicates type of device attached to this SATA port.
Example:
A:>syscfg --SataPortDDriveType
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortDModel*
Table 157. SataPortDModel
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortDModel
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortE / sata4
Table 158. SataPortE / sata4
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: auto, off
● On Dell’s 12th generation PowerEdge and later systems: Off, Auto
Description
Turns the SATA port 4 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata4=auto
sata4=auto
Applicable Systems All PowerEdge systems.
SYSCFG 89