CLI Guide

Table 84. ClusterOnDie (continued)
Description Enables or disables the Cluster On Die option. When enabled, the feature enhances
the performance of the system with two caching agents.
A:>syscfg --ClusterOnDie=Enabled
ClusterOnDie=Enabled
Applicable Systems PowerEdge 12G and later systems
RedundantOsLocation
Table 85. RedundantOsLocation
Valid Arguments
● On systems prior to 14G: NA
Description
Specifies the backup device for the Redundant OS Control feature. When Redundant
OS Boot is set to Enabled, the BIOS will boot to this device.
NOTE: In order for the devices and slots listed below to show up as optional
backup devices, their settings must be as shown:
SD Card Port -- On
Internal USB Port -- On
Embedded SATA -- anything other than Off
PCIe Slot Disablement -- Enabled
Example:
A:>syscfg --RedundantOsLocation
Applicable Systems
PowerEdge 14G and later systems.
Miscellaneous Settings
You can manage the miscellaneous settings using the options in this group.
AssetTag/asset*
Table 86. AssetTag/asset*
Valid Arguments
● On systems prior to 12G: read-only
● On 12G and later systems: read-only
Description Reports or sets the customer-programmable asset tag number for a system. This
value can be replicated.
NOTE: The Asset Tag is a string assigned to a system, usually by an
administrator, for security or tracking purposes. The Asset Tag can be up to
10 characters long and can contain only printable US-ASCII characters. For more
information on delimiters, see Command Line Option Delimiters.
Example:
A:>syscfg --asset=<ASSETTAG>
asset=ASSETTAG
Applicable Systems All PowerEdge systems except Blade systems
SYSCFG 65