CLI Guide

Table 69. HttpDev<n>VlanId (continued)
Description When VLAN is enabled, identifies which of the 4094 possible VLANs contains the
desired DNS or HTTP servers. This value can be 1 – 4094 inclusive. Where n is from
1 to 4.
Example:
A:>syscfg --HttpDev2VlanId=Enabled
Applicable Systems PowerEdge 14G and later systems
Memory Settings
You can manage the memory-related configuration settings using the objects in this group.
CorrEccSmi/memprefailurenotify
Table 70. CorrEccSmi/memprefailurenotify
Valid Arguments
● On systems prior to 12G: enable, disable
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the Correctable ECC SMIs. When enabled, the SMIs report the
Correctable ECC errors.
This option can be replicated.
Example:
A:>syscfg --CorrEccSmi=Enabled
CorrEccSmi=Enabled
Applicable Systems PowerEdge 12G and later systems
DynamicCoreAllocation
Table 71. DynamicCoreAllocation
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the operating system capability to maintain the logical processors
in the idle state to reduce power consumption.
Example:
A:>syscfg --DynamicCoreAllocation=Enabled
DynamicCoreAllocation=Enabled
Applicable Systems PowerEdge 12G and later systems
60 SYSCFG