CLI Guide

Table 66. HttpDev<n>Interface (continued)
Example:
A:>syscfg --HttpDev1Interface=NIC.Integrated.1-2-1
HttpDev1Interface=NIC.Integrated.1-1-1
Applicable Systems PowerEdge 14G and later systems
HttpDev<n>Protocol
Table 67. HttpDev<n>Protocol
Valid Arguments
● On systems prior to 14G: NA
● On 14G and later systems: IPv4, IPv6
Description Determines whether the Internet Protocol version 4 older version or the Internet
Protocol version 6 the newest version is used for this device. The value of n in
HttpDevnProtocol can be from 1 to 4.
Example:
A:>syscfg --HttpDev2Protocol=IPv4
HttpDev2Protocol=IPv4
Applicable Systems PowerEdge 14G and later systems
HttpDev<n>VlanEnDis
Table 68. HttpDev<n>VlanEnDis
Valid Arguments
● On systems prior to 14G: NA
● On 14G and later systems: Enabled, Disabled
Description Set the field to Enabled if your DNS or HTTP servers reside on a Virtual LAN
(VLAN). The value of n in HttpDevnVlanEnDis can be from 1 to 4.
Example:
A:>syscfg --HttpDev3VlanEnDis=Enabled
HttpDev3VlanEnDis=Enabled
Applicable Systems PowerEdge 14G and later systems
HttpDev<n>VlanId
Table 69. HttpDev<n>VlanId
Valid Arguments
● On systems prior to 14G: NA
● On 14G and later systems: Enabled, Disabled
SYSCFG 59