CLI Guide

Table 33. EmbVideo/embvideoctrl (continued)
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the BIOS support for the Embedded Video Controller
Example:
A:>syscfg --embvideoctrl=enable
embvideoctrl=enable
Applicable Systems PowerEdge 11G and later systems
IoatEngine/ioat
Table 34. IoatEngine/ioat
Valid Arguments
● On systems prior to 12G: enable, disable
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the I/O Acceleration Technology (I/OAT) DMA Engine option.
This option must be enabled only if the hardware and software support I/OAT on
your system. This option can be replicated.
Example:
A:>syscfg --ioat=enabled
ioat=enabled
Table 34. IoatEngine/ioat
Applicable Systems All systems except PowerEdge 12G systems
IntegratedNetwork1
Table 35. IntegratedNetwork1
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: Enabled, DisabledOs
Description Enables or disables Integrated Network 1.
NOTE: If set to DisabledOs, the Integrated NICs may still be available for
shared network access by the embedded management controller. This function
must be configured through the NIC management utilities provided with your
system.
Example:
A:>syscfg --IntegratedNetwork1=Enabled
IntegratedNetwork1=Enabled
Applicable Systems PowerEdge 12G and later systems
48 SYSCFG