CLI Guide

RAIDCFG Options And Arguments
Table below lists all of the valid options, parameters, and arguments for the RAIDCFG utility. For more information on valid
RAIDCFG options and their specific uses, see RAID Configuration Utility Options and Arguments.
Mandatory command line options must be present in the command. Optional command line options can be typed in any order
after the mandatory options have been typed. Many options have both a short and long format. Short and long format options
cannot be used in the same command line instance.
Table below shows some examples of valid and invalid short and long format command line instances. For an explanation of
the specific order for each option, see RAID Configuration Utility Options And Arguments. For a list of frequently used RAID
commands, see Quick Reference To RAIDCFG Commands.
NOTE: Some of the following options or arguments might not be available on all systems.
Table 332. RAIDCFG Short and Long Format Options
Option Valid Arguments Short Description Mandatory or Optional
No option
-h
-?
or
/?
NA Displays general usage information
for the utility. The usage information
consists of a comprehensive list of valid
options, parameters, and arguments.
Optional.
See General Help for
specific usage information.
-ac or
action
blink
Blinks the specified physical disks on
the specified controller.
See Blinking And Unblinking
Array Disks for specific
usage information.
ci
or
cancelinit
Cancels the slow or full initialization on
the selected virtual disk.
See Initializing Virtual
Disks for specific usage
information.
cc or consistencycheck Checks the consistency for a specified
virtual disk.
See Consistency Check For
Virtual Disk for specific
information.
ccc or
cancelconsistencycheck
Cancels the consistency check for a
specified virtual disk.
See Consistency Check For
Virtual Disk for specific
information.
chsk
or
changesecuritykey
Changes the encryption key of the
encryption-capable controller.
See Changing Encryption
Key for specific information.
crbd
or
cancelrebuild
Cancels the rebuild of the physical disk
associated with a specified virtual disk.
See Configuring Physical
Disk Rebuild for specific
information.
172 RAIDCFG