CLI Guide

serialchannelaccess
Table 319. serialchannelaccess
Option Sub-option Valid Arguments Description
--serialchannelaccess
or sca
Sets or displays the channel access
settings for the serial channel. This
option can be replicated.
--ipmioverserial disable,
alwaysavail
Sets the serial channel access mode.
This sub-option can be replicated.
--channelprivlmt user, operator,
administrator
Sets the maximum privilege level
accepted for the serial channel. This
sub-option can be replicated.
Example (to configure the serial channel
with IPMI over serial disabled and
the maximum privilege level set to
administrator):
A:>syscfg
serialchannel access --
ipmioverserial=disable
--
channelprivlmt=administrat
or serialchannelaccess
ipmioverserial=disable
channelprivlmt=administrat
or
serialchannelinfo
Table 320. serialchannelinfo
Option Sub-option Valid Arguments Description
--serialchannelinfo
or sci
Displays media and protocol information
about the serial channel. This option cannot
be replicated.
--mediumtype
NA Displays the medium type for the serial
channel. This sub-option cannot be
replicated.
--prottype
NA Displays the protocol type for the
serial channel. This sub-option cannot be
replicated.
--ssnsupport
NA Displays the session support information for
the serial channel. This sub-option cannot
be replicated.
--activessncount
NA
Displays the number of sessions that are
activated on the serial channel. This sub-
option cannot be replicated.
SYSCFG 157