CLI Guide

Table 306. lanuseraccess (continued)
Option Sub-option Valid Arguments Description
--useridswithfixednames
NA
Reports the number of User IDs with fixed
names on the LAN channel.
Example 1 (to enable User ID 2 on the LAN
channel with administrator privileges):
A:>syscfg lanuseraccess
--userid=2 --
usrprivlmt=administrator
Example 2 (to enable User ID 4 on the LAN
channel with user privileges):
A:>syscfg lanuseraccess --
userid=4 --usrprivlmt=user
lcd1
Table 307. lcd1
Option Sub-option Valid Arguments Description
--lcd1
NA <string>
Sets the first line of user-defined text on the
system LCD. This option can be replicated. For
more information on delimiters, see Command
Line Option Delimiters.
NOTE: Before setting user strings for --
lcd1 , ensure that --lcd is set to user.
lcd2
Table 308. lcd2
Option Sub-option Valid Arguments Description
--lcd1
NA <string>
Sets the second line of user-defined text on the
system LCD. This option can be replicated. For
more information on delimiters, see Command
Line Option Delimiters.
loaddefaults*
Table 309. loaddefaults*
Option Sub-option Valid Arguments Description
--loaddefaults*
NA NA
Restores the BMC to the defaults originally loaded
on the controller. This option is used to return the
BMC to a known-good state. This option cannot
be replicated.
NOTE: The NMI, power button, and SOL
defaults are not reset by using this option.
SYSCFG 149