CLI Guide
Table Of Contents
- Dell EMC OpenManage Deployment Toolkit Version 6.0.1 Command Line Interface Reference Guide
- Introduction
- Command Syntax Overview
- DTK Seamless package
- SYSCFG
- Features
- SYSCFG General Options
- SYSCFG For BIOS Configuration
- SYSCFG BIOS commands
- BIOS Option Settings
- Boot Settings
- Integrated Devices
- EmbNic1/embnic1
- EmbNic1Nic2/embnic1nic2
- EmbNic2/embnic2
- EmbNic3/embnic3
- EmbNic3Nic4/embnic3nic4
- EmbNic4/embnic4
- EmbVideo/embvideoctrl
- IoatEngine/ioat
- IntegratedNetwork1
- IntegratedNetwork2
- IntegratedRaid/integratedraid
- IntegratedSas/integratedsas
- InternalSdCard/embsdcard
- InternalSdCardRedundancy/embsdcardredundancy
- InternalUsb/internalusb
- InternalUsb1/internalusbport1
- InternalUsb2/internalusbport2
- OsWatchdogTimer/oswatchdogtimer
- SriovGlobalEnable/sriov
- UsbPorts/usbports
- MmioAbove4Gb
- Usb3Setting
- CurrentEmbVideoState
- InternalSdCardPrimaryCard
- IscsiDev1Con
ChapType - IscsiDev1Con
DhcpEnDis - IscsiDev1ConnEnDis
- IscsiDev1ConnInterface
- IscsiDev1ConnProtocol
- IscsiDev1ConnTimeout
- IscsiDev1ConnVlanEnDis
- IscsiDev1ConnVlanId
- IscsiDev1ConnAuth
- Network Settings
- Memory Settings
- Miscellaneous Settings
- One-Time Boot
- Processor Settings
- DataReuse/datareuse
- DcuIpPrefetcher
- DcuStreamerPrefetcher/dcustreamerprefetcher
- LogicalProc/logicproc
- Proc1Brand*
- Proc1Id*
- Proc1L2Cache*
- Proc1L3Cache*
- Proc1NumCores*
- Proc2Brand*
- Proc2Id*
- Proc2L2Cache*
- Proc2L3Cache*
- Proc2NumCores*
- Proc3Brand*
- Proc3Id*
- Proc3L2Cache*
- Proc3L3Cache*
- Proc3NumCores*
- Proc4Brand*
- Proc4Id*
- Proc4L2Cache*
- Proc4L3Cache
- Proc4NumCores*
- Proc64bit*
- ProcAdjCacheLine/adjcacheprefetch
- ProcBusSpeed*
- ProcCores/cpucore
- ProcCoreSpeed*
- ProcExecuteDisable/cpuxdsupport
- ProcHwPrefetcher/hwprefetcher
- ProcVirtualization / virtualization
- QpiBandwidthPriority / qpibandwidthpriority
- QpiSpeed
- RtidSetting
- ProcnControlledTurbo
- ProcConfigTdp
- ProcX2Apic
- SATA Settings
- EmbSata / embsataraid
- eSataPort1
- eSataPort1Capacity*
- eSataPort1DriveType*
- eSataPort1Model*
- SataPortA / sata0
- SataPortACapacity*
- SataPortADriveType*
- SataPortAModel*
- SataPortB / sata1
- SataPortBCapacity*
- SataPortBDriveType*
- SataPortBModel*
- SataPortC / Sata2
- SataPortCCapacity*
- SataPortCDriveType*
- SataPortCModel*
- SataPortD / sata3
- SataPortDCapacity*
- SataPortDDriveType*
- SataPortDModel*
- SataPortE / sata4
- SataPortECapacity*
- SataPortEDriveType*
- SataPortEModel*
- SataPortF / sata5
- SataPortFCapacity*
- SataPortFDriveType*
- SataPortFModel*
- SataPortG / sata6
- SataPortGCapacity*
- SataPortGDriveType*
- SataPortGModel*
- SataPortH / sata7
- SataPortHCapacity*
- SataPortHDriveType*
- SataPortHModel*
- SataPortI / sata7
- SataPortICapacity*
- SataPortIDriveType*
- SataPortIModel*
- SataPortJ / sata7
- SataPortJCapacity*
- SataPortJDriveType*
- SataPortJModel*
- SecurityFreezeLock
- Serial Communication
- Slot Disablement
- System Information
- System Profile Settings
- System Security
- AcPwrRcvry / acpower
- AcPwrRcvryDelay
- AcPwrRcvryUserDelay
- AesNi
- IntelTxt/inteltxt
- NmiButton/nmibutton
- PasswordStatus/pwdlock
- PwrButton/powerbutton
- SetupPassword/setuppwd*
- SysPassword/syspwd*
- SystemCpldVersion*
- TcmActivation/tcmactivation
- TcmClear/tcmclear
- TcmSecurity/tcmsecurity
- TpmActivation/tpmactivation
- TpmClear/tpmclear
- TpmSecurity/tpmsecurity
- TpmStatus
- TpmInfo*
- TpmCommand
- SecureBoot
- SecureBootPolicy
- UefiVariableAccess
- SecureBootMode
- TpmPpiBypassClear
- TpmPpiBypassProvision
- UEFI Boot Settings
- DTKTORACADM
- SYSCFG Options On PowerEdge Systems Prior To PowerEdge 12G Systems
- Sub Options And Arguments For power Option
- Sub Options And Arguments For tcm Option
- Sub Options And Arguments For tpm Option
- SYSCFG For BMC And Remote Access Controller Configuration
- bmcversion
- chassistype*
- clearsel*
- controlpanelaccess
- deviceguid*
- encryptkey
- fiberchannel
- floppy
- formfactor
- hddfailover
- hpcmode
- htassist
- idecdrom
- idracgui
- lpt
- memdynamicpower
- memintleave
- memremap
- mouse
- noraidprompt*
- oldsetuppwd
- oldsyspwd
- opticaldrivectrl
- remflashmedia
- serial1
- serial2
- slotname
- sma
- sysrev*
- usb
- usbflash
- vflash
- identify
- idracversion
- kvmstatusonlcd
- lancfgparams
- lanchannelaccess
- lanchannelinfo
- lanuseraccess
- lcd1
- lcd2
- loaddefaults*
- nextboot
- nmibutton
- passwordaction
- pefcfgparams
- powerbutton
- powerctl
- racreset*
- serialcfgparams
- serialchannelaccess
- serialchannelinfo
- serialuseraccess
- solaction
- solcfgparams
- ssninfo
- useraction
- username
- version*
- virutualmedia
- SYSCFG For State Configuration
- SYSCFG for System Configuration
- SYSCFG For IPv6 Configuration
- PCI Reporting
- RAIDCFG
- Features
- Supported RAID Controllers
- RAIDCFG Options And Arguments
- RAID Configuration Utility Options And Arguments
- General Help
- Enumerating RAID Controllers
- Creating Virtual Disks
- Enumerating Array Disks
- Blinking And Unblinking Array Disks
- Enumerating Virtual Disks
- Deleting Virtual Disks
- Increasing Virtual Disk Size
- Setting A Virtual Disk As Bootable Virtual Disk
- Blinking And Unblinking Virtual Disks
- Setting Virtual Disk Name
- Setting Environment Variables
- RAID Replication Options
- Assigning, Unassigning, And Listing Global Hot Spares
- Importing And Clearing Foreign Configurations
- Importing Secured Foreign Configuration
- Displaying Foreign Key Ids
- Creating Encryption Key
- Changing Encryption Key
- Deleting Encryption Key
- Configuring Physical Disk Rebuild
- Configuring Array Disk As RAID
- Configuring Physical Disk State
- Replacing Physical Disk Of A Virtual Disk
- Consistency check for virtual disk
- Erasing Encrypted Physical Disk
- Discarding Preserved Cache
- Initializing Virtual Disks
- Resetting The Controller
- Enabling And Disabling Persistent Dedicated Hot Spares
- Setting And Displaying The PCIe Link Speed
- Setting Boot Mode
- Configuring Auto Import
- Miscellaneous Options
- Quick Reference To RAIDCFG Commands
- UPINIT
- Messages And Codes
- BMC Platform Events Filter Alert Messages
- Sample File Formats
Table 1. SYSCFG equivalent RACADM commands (continued)
Group SYSCFG Commands Equivalent RACADM Commands
System Information --svctag BIOS.SysInformation.SystemServiceTag
System Security --AcPwrRcvryDelay BIOS.SysSecurity.AcPwrRcvryDelay
--PwrButton BIOS.SysSecurity.PwrButton
--SetupPassword BIOS.SysSecurity.SetupPassword
--SysPassword BIOS.SysSecurity.SysPassword
System Power --maxpowercap System.Power.Cap.MaxThreshold
--minpowercap System.Power.Cap.MinThreshold
--capenable System.Power.Cap.Enable
Supported Systems
For a complete list of supported Dell PowerEdge systems, see the Dell Systems Software Support Matrix in the required version
of OpenManage Software at dell.com/openmanagemanuals
Supported operating systems
DTK utilities support Windows PE 10.0 (64-bit), and Windows PE 5.1 (64-bit) to deploy the following operating systems in BIOS
and UEFI mode:
● Microsoft Windows Server 2012 R2 Foundation, Essentials, Standard, and Datacenter editions
● Microsoft Windows Server 2016 Foundation, Essentials, and Standard editions
● Dell’s Precision R7920 Supported operating systems
○ Microsoft Windows 8.1 (64-bit)
○ Microsoft Windows 10 (64-bit)
For Linux, the DTK utilities support deploying the following operating systems in BIOS and UEFI mode:
● SUSE Linux Enterprise Server 12 SP2 (64-bit)
● Red Hat Enterprise Linux 7.3 (64-bit)
● Red Hat Enterprise Linux 6.9(64-bit)
You can install the DTK Linux RPM utilities on the following operating systems in BIOS and UEFI mode:
● SUSE Linux Enterprise Server 12 SP2 (64-bit)
● Red Hat Enterprise Linux 7.3 (64-bit)
● Red Hat Enterprise Linux 6.9 (64-bit)
NOTE:
The RPMs are available in the RPMs folder of DTK ELI ISO at linux.dell.com/repo/hardware, and also in
the Dell EMC Systems Management Tools and Documentation DVD.
Toolkit Utilities
DTK contains utilities that allow you to configure the BIOS, Baseboard Management Controller (BMC), Remote Access
Controller (RAC), RAID controllers, and hard-drive partitions on supported Dell systems. Additionally, the utilities can be
integrated with the sample files provided with the toolkit to fully configure one-to-many target systems in a scripted mass
system deployment.
System Configuration Utility
The SYSCFG utility performs the following tasks:
Introduction
13