CLI Guide

TpmPpiBypassClear
Table 238. TpmPpiBypassClear
Valid Arguments
● On systems prior to 14G: N/A
● On 14G and later systems: Enabled, Disabled
Description
When set to Enabled, allows the Operating System to bypass Physical Presence
Interface (PPI) prompts when issuing PPI Advanced Configuration and Power
Interface (ACPI) clear operations.
Example:
A:>syscfg --tpmPpiByPassClear=Enabled
tpmPpiBypassClear=Enabled
Applicable Systems 14G PowerEdge systems.
TpmPpiBypassProvision
Table 239. TpmPpiBypassProvision
Valid Arguments
● On systems prior to 14G: N/A
● On 14G and later systems: Enabled, Disabled
Description
When set to Enabled, allows the Operating System to bypass Physical Presence
Interface (PPI) prompts when issuing PPI Advanced Configuration and Power
Interface (ACPI) provisioning operations.
Example:
A:>syscfg --tpmPpiByPassProvision=Enabled
tpmPpiBypassProvision=Enabled
Applicable Systems 14G PowerEdge systems.
UEFI Boot Settings
You can manage the UEFI settings using the options in this group.
UefiBootSeq
Table 240. UefiBootSeq
Valid Arguments
● On systems prior to 12G
: NA
● On 12G and later systems
: list of device names separated by commas
Description
Enables, disables, and orders the devices in a UEFI boot order list. Only the devices
present on the system are listed in the UefiBootSeq. The first option in the list is
attempted first. If the first option is not successful, the second option is attempted,
and so on. The system attempts to launch only the enabled boot options and does
SYSCFG 117