CLI Guide

Table 229. TpmClear/tpmclear (continued)
Example:
A:>syscfg --TpmClear=Yes
TpmClear=Yes
Applicable Systems All systems prior to PowerEdge 13G systems.
TpmSecurity/tpmsecurity
Table 230. TpmSecurity/tpmsecurity
Valid Arguments
● On systems prior to 12G: off, onwithpbm, onwithoutpbm
● On 12G and later systems: Off, OnPbm, OnNoPbm
Description
Controls the reporting of the Trusted Platform Module (TPM) in the system.
NOTE: The tpmsecurity option is a sub-option of tpm.
Example:
A:>syscfg --tpmsecurity=off
tpmsecurity=off
Applicable Systems All PowerEdge systems.
TpmStatus
Table 231. TpmStatus
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: read-only
Description
Displays the current status of TPM.
Example:
A:>syscfg --TpmStatus
Applicable Systems PowerEdge 12G and later systems
TpmInfo*
Table 232. TpmInfo*
Valid Arguments
● On systems prior to 13G: NA
● On 13G and later systems: read-only
Description
Displays the TPM type and firmware version.
Example:
A:>syscfg --TpmInfo
114 SYSCFG