CLI Guide

Table 214. AcPwrRcvry / acpower (continued)
● On Dell’s 12th generation PowerEdge and later systems: On, Off, Last
Description Sets the behavior for the system after AC power is lost. This option specifies how
the system responds to the restoration of AC power and is particularly useful in
systems that are turned off using a power strip. When set to on, the system turns
on after AC is restored. When set to off, the system does not turn on after AC
is restored. When set to last, the system turns on if the system was on when AC
power was lost; if the system was off when AC power was lost, the system remains
off when power is restored. This option can be replicated.
Example:
A:>syscfg --acpower=on
acpower=on
Applicable Systems All PowerEdge systems.
AcPwrRcvryDelay
Table 215. AcPwrRcvryDelay
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: Immediate, User, Random
Description
Specifies how the system supports the staggering of power-up after AC power has
been restored to the system.
Example:
A:>syscfg --AcPwrRcvryDelay=Immediate
AcPwrRcvryDelay=Immediate
Applicable Systems PowerEdge 12G and later systems
AcPwrRcvryUserDelay
Table 216. AcPwrRcvryUserDelay
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: <integer>
Description
Controls the user defined AC Recovery Delay. The delay must be in the range of 60
seconds to 240 seconds.
Example:
A:>syscfg --AcPwrRcvryUserDelay=60
AcPwrRcvryUserDelay=60
Applicable Systems PowerEdge 12G and later systems
108 SYSCFG