Deployment Guide
Table Of Contents
- Dell OpenManage Deployment Toolkit Version 5.5 Command Line Interface Reference Guide
- Introduction
- Command Syntax Overview
- DTK Seamless package
- SYSCFG
- Features
- SYSCFG General Options
- SYSCFG For BIOS Configuration
- SYSCFG BIOS commands
- BIOS Option Settings
- Boot Settings
- Integrated Devices
- Network Settings
- Memory Settings
- Miscellaneous Settings
- One-Time Boot
- Processor Settings
- SATA Settings
- Serial Communication
- Slot Disablement
- System Information
- System Profile Settings
- System Security
- UEFI Boot Settings
- DTKTORACADM
- SYSCFG Options On PowerEdge Systems Prior To PowerEdge 12G Systems
- Sub Options And Arguments For power Option
- Sub Options And Arguments For tcm Option
- Sub Options And Arguments For tpm Option
- SYSCFG For BMC And Remote Access Controller Configuration
- bmcversion
- chassistype*
- clearsel*
- controlpanelaccess
- deviceguid*
- encryptkey
- fiberchannel
- floppy
- formfactor
- hddfailover
- hpcmode
- htassist
- idecdrom
- idracgui
- lpt
- memdynamicpower
- memintleave
- memremap
- mouse
- noraidprompt*
- oldsetuppwd
- oldsyspwd
- opticaldrivectrl
- remflashmedia
- serial1
- serial2
- slotname
- sma
- sysrev*
- usb
- usbflash
- vflash
- identify
- idracversion
- kvmstatusonlcd
- lancfgparams
- lanchannelaccess
- lanchannelinfo
- lanuseraccess
- lcd1
- lcd2
- loaddefaults*
- nextboot
- nmibutton
- passwordaction
- pefcfgparams
- powerbutton
- powerctl
- racreset*
- serialcfgparams
- serialchannelaccess
- serialchannelinfo
- serialuseraccess
- solaction
- solcfgparams
- ssninfo
- useraction
- username
- version*
- virutualmedia
- SYSCFG For State Configuration
- SYSCFG for System Configuration
- SYSCFG For IPv6 Configuration
- PCI Reporting
- RAIDCFG
- Features
- Supported RAID Controllers
- RAIDCFG Options And Arguments
- RAID Configuration Utility Options And Arguments
- General Help
- Enumerating RAID Controllers
- Creating Virtual Disks
- Enumerating Array Disks
- Blinking And Unblinking Array Disks
- Enumerating Virtual Disks
- Deleting Virtual Disks
- Increasing Virtual Disk Size
- Setting A Virtual Disk As Bootable Virtual Disk
- Blinking And Unblinking Virtual Disks
- Setting Virtual Disk Name
- Setting Environment Variables
- RAID Replication Options
- Assigning, Unassigning, And Listing Global Hot Spares
- Importing And Clearing Foreign Configurations
- Importing Secured Foreign Configuration
- Displaying Foreign Key Ids
- Creating Encryption Key
- Changing Encryption Key
- Deleting Encryption Key
- Configuring Physical Disk Rebuild
- Configuring Array Disk As RAID
- Configuring Physical Disk State
- Replacing Physical Disk Of A Virtual Disk
- Consistency check for virtual disk
- Erasing Encrypted Physical Disk
- Discarding Preserved Cache
- Initializing Virtual Disks
- Resetting The Controller
- Enabling And Disabling Persistent Dedicated Hot Spares
- Setting And Displaying The PCIe Link Speed
- Setting Boot Mode
- Configuring Auto Import
- Miscellaneous Options
- Quick Reference To RAIDCFG Commands
- UPINIT
- Messages And Codes
- BMC Platform Events Filter Alert Messages
- Sample File Formats
TcmClear/tcmclear
Table 209. TcmClear/tcmclear
Valid Arguments
• On systems prior to 13G: Yes, No
• On 13G systems: NA
Description
CAUTION: Clearing the TCM will cause loss of all keys in the TCM. This could
aect booting of the operating system.
When set to Yes, all the contents of the TCM will be cleared. This eld is read-only
when TCMSecurity is set to Off.
NOTE: The tcmclear option is a sub-option of tcm.
Example:
A:>syscfg --TcmClear=Yes
TcmClear=Yes
Applicable Systems All systems prior to PowerEdge 13G systems.
TcmSecurity/tcmsecurity
Table 210. TcmSecurity/tcmsecurity
Valid Arguments
• On systems prior to 12G: on, o
• On 12G and later systems: On, O
Description
Controls the reporting of the Trusted Cryptography Module (TCM) in the system.
NOTE: The tcmsecurity option is a sub-option of tcm.
Example:
A:>syscfg --tcmsecurity=on
tcmsecurity=on
Applicable Systems All PowerEdge systems.
TpmActivation/tpmactivation
Table 211. TpmActivation/tpmactivation
Valid Arguments
• On systems prior to 12G: enabled, disabled, nochange
• On 12G systems: NoChange, Activate, Deactivate
Description
Allows the user to change the operational state of the Trusted Platform Module (TPM).
This eld is read-only when TPM Security is set to Off.
NOTE: The tpmactivation option is a sub-option of tpm.
Example:
A:>syscfg --tpmactivation=enabled
tpmactivation=enabled
Applicable Systems All systems prior to PowerEdge 13G systems.
96