Deployment Guide

other core has gone into an idle state. When enabled, the processor can operate in
Turbo Boost Mode.
Example:
A:>syscfg --turbomode=enable
--turbomode=enable
Applicable Systems Dell’s 11th generation PowerEdge and later systems running on Intel processors
SysProle / prole
Table 192. SysProle / prole
Valid Arguments
• On systems prior to Dell’s 12th generation PowerEdge systems: maxperformance,
osctl, apc, custom
• On Dell’s 12th generation PowerEdge and later systems: PerfPerWatt OptimizedOs,
PerfPerWatt OptimizedDapc, PerfOptimized, Custom, DenseCfg Optimized
Description
Congures the system power prole. When set to a mode other than custom, BIOS will
set each option accordingly. When set to custom, you can change setting of each
option.
NOTE: On systems prior to Dell’s 12th generation PowerEdge systems,
profile is a sub-option of power.
Example:
A:>syscfg --profile=maxperformance
profile=maxperformance
Applicable Systems All PowerEdge systems
EnergyEcientTurbo
Table 193.
EnergyEcientTurbo
Valid Arguments
• On systems prior to Dell’s 13th generation PowerEdge systems: NA
• On Dell’s 13th generation PowerEdge and later systems: Enabled, Disabled
Description
Enables or disables the Energy Ecient Turbo (EET). EET is a mode of operation where
the core frequency of a processor is adjusted within the turbo range based on
workload.
Example:
A:>syscfg --EnergyEfficientTurbo=Enabled
EnergyEfficientTurbo=Enabled
Applicable Systems Dell’s 13th generation PowerEdge and later systems
Proc n TurboCoreNum
Table 194. Proc
n TurboCoreNum
Valid Arguments
• On systems prior to Dell’s 13th generation PowerEdge systems: NA
• On Dell’s 13th generation PowerEdge and later systems: All, 1, 2, 4, 6, 8, 10, 12, 14,
16, 18
Description
Sets the number of Turbos Boost-enabled cores for a processor. By default, the
maximum number of cores per processor is enabled.
90