Deployment Guide

Error Code Message
50 Mount Operation failed.
51 Cannot Format Array Disk.
52 Bad chunk size.
53 Invalid disk.
54 Virtual disk not found.
55 Virtual disk locked.
56 Drive in use.
57 Reached maximum physical size.
58 Reached maximum count of virtual disks.
59 There is not enough free space on the array disk(s) to allow the
operation to complete; the size of the virtual disk is too large; or
communication to the array disk(s) has been lost.
60 Select the array disks that are part of a similar type of virtual disk
(T10 protection and encryption capability) or the array disks that are
not part of any virtual disks.
61 Invalid Parameter
62 Failed drive cannot be added.
63 The controller cannot support the number of array disks that you have
selected. Choose a smaller number.
64 Delete virtual disk failed. Controller busy.
65 Delete virtual disk failed.
66 Create virtual disk failed.
67 Create virtual disk failed. Controller busy.
68 Create virtual disk failed. Failed to map virtual disk to operating
system disk.
69 Create virtual disk failed. Failed to map virtual disk to operating
system disk.
70 Virtual disk initialization failed.
71 Virtual disk initialization failed. Controller busy.
72 Virtual disk reconstruction failed. Controller busy.
73 Virtual disk resynching failed. Controller busy.
74 Flush Virtual disk's cache failed on controller.
75 Virtual disk partition specified not found.
76 Unsupported cache policy value.
77 Unsupported write policy value.
78 Unsupported read policy value.
201