Deployment Guide
Table Of Contents
- Dell OpenManage Deployment Toolkit Version 5.5 Command Line Interface Reference Guide
- Introduction
- Command Syntax Overview
- DTK Seamless package
- SYSCFG
- Features
- SYSCFG General Options
- SYSCFG For BIOS Configuration
- SYSCFG BIOS commands
- BIOS Option Settings
- Boot Settings
- Integrated Devices
- Network Settings
- Memory Settings
- Miscellaneous Settings
- One-Time Boot
- Processor Settings
- SATA Settings
- Serial Communication
- Slot Disablement
- System Information
- System Profile Settings
- System Security
- UEFI Boot Settings
- DTKTORACADM
- SYSCFG Options On PowerEdge Systems Prior To PowerEdge 12G Systems
- Sub Options And Arguments For power Option
- Sub Options And Arguments For tcm Option
- Sub Options And Arguments For tpm Option
- SYSCFG For BMC And Remote Access Controller Configuration
- bmcversion
- chassistype*
- clearsel*
- controlpanelaccess
- deviceguid*
- encryptkey
- fiberchannel
- floppy
- formfactor
- hddfailover
- hpcmode
- htassist
- idecdrom
- idracgui
- lpt
- memdynamicpower
- memintleave
- memremap
- mouse
- noraidprompt*
- oldsetuppwd
- oldsyspwd
- opticaldrivectrl
- remflashmedia
- serial1
- serial2
- slotname
- sma
- sysrev*
- usb
- usbflash
- vflash
- identify
- idracversion
- kvmstatusonlcd
- lancfgparams
- lanchannelaccess
- lanchannelinfo
- lanuseraccess
- lcd1
- lcd2
- loaddefaults*
- nextboot
- nmibutton
- passwordaction
- pefcfgparams
- powerbutton
- powerctl
- racreset*
- serialcfgparams
- serialchannelaccess
- serialchannelinfo
- serialuseraccess
- solaction
- solcfgparams
- ssninfo
- useraction
- username
- version*
- virutualmedia
- SYSCFG For State Configuration
- SYSCFG for System Configuration
- SYSCFG For IPv6 Configuration
- PCI Reporting
- RAIDCFG
- Features
- Supported RAID Controllers
- RAIDCFG Options And Arguments
- RAID Configuration Utility Options And Arguments
- General Help
- Enumerating RAID Controllers
- Creating Virtual Disks
- Enumerating Array Disks
- Blinking And Unblinking Array Disks
- Enumerating Virtual Disks
- Deleting Virtual Disks
- Increasing Virtual Disk Size
- Setting A Virtual Disk As Bootable Virtual Disk
- Blinking And Unblinking Virtual Disks
- Setting Virtual Disk Name
- Setting Environment Variables
- RAID Replication Options
- Assigning, Unassigning, And Listing Global Hot Spares
- Importing And Clearing Foreign Configurations
- Importing Secured Foreign Configuration
- Displaying Foreign Key Ids
- Creating Encryption Key
- Changing Encryption Key
- Deleting Encryption Key
- Configuring Physical Disk Rebuild
- Configuring Array Disk As RAID
- Configuring Physical Disk State
- Replacing Physical Disk Of A Virtual Disk
- Consistency check for virtual disk
- Erasing Encrypted Physical Disk
- Discarding Preserved Cache
- Initializing Virtual Disks
- Resetting The Controller
- Enabling And Disabling Persistent Dedicated Hot Spares
- Setting And Displaying The PCIe Link Speed
- Setting Boot Mode
- Configuring Auto Import
- Miscellaneous Options
- Quick Reference To RAIDCFG Commands
- UPINIT
- Messages And Codes
- BMC Platform Events Filter Alert Messages
- Sample File Formats
Option Valid Arguments Short Description Mandatory or Optional
rbd
or
rebuild
Rebuilds the physical disk associated with
a specied virtual disk.
See Conguring Physical
Disk Rebuild for specic
information.
rst
or
reset
Resets the selected controller.
See Resetting The Controller
for specic usage
information.
sbf
or
setbootflag
Sets the indicated virtual disk as boot VD
on the indicated controller.
See Setting A Virtual Disk As
Bootable Virtual Disk for
specic usage information.
sbm
or
setbootmode
Sets the bootmode of the controller to 0
(BIOS stop on error), 1 (BIOS continue
on error), or 2 (Headless continue on
error) during system startup or reboot.
See Setting Boot Mode for
specic usage information.
sghs
or
setglobalhotspare
Assigns the specied disks as global hot
spares on the specied controller.
Optional. See Assigning,
Unassigning, And Listing
Global Hot Spares for
specic usage information.
sli
or
slowinit
Initializes the virtual disk for the specied
controller using the slowinit
command.
See Initializing Virtual Disks
for specic usage
information.
spciels
or
setPCIeLinkSpeed
Sets the PCIe link speed of the controller
to 2 or 3.
See Setting And Displaying
The PCIe Link Speed for
specic usage information.
svdn
or
setvdname
Sets the name of the specied virtual
disk on the specied controller.
See Setting Virtual Disk
Name for specic usage
information.
-ad or adisk
NA Species an array disk command. See Enumerating Array Disks
for specic usage
information.
ch:targ, ch:targ, ...
or ch:targ:lun,...
or ch:targ:enc
channel:target, or
channel:target:lun,
or
channel:target:enclosure
Species an array disk.
For SCSI controllers, the value of LUN
should always be 0.
For SAS controllers, the value of
enclosure can be non-zero, in which case
you must specify values for channel,
target, and enclosure.
NOTE: You can also use pdisk or
-pd instead of adisk or -ad to
specify an array disk.
Optional.
See Enumerating Array Disks
for specic usage
information.
151