Deployment Guide

AcPwrRcvryUserDelay
Table 198. AcPwrRcvryUserDelay
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: <integer>
Description
Controls the user defined AC Recovery Delay. The delay must be in the range of 60
seconds to 240 seconds.
Example:
A:>syscfg --AcPwrRcvryUserDelay=60
AcPwrRcvryUserDelay=60
Applicable Systems PowerEdge 12G and later systems
AesNi
Table 199. AesNi
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: Enabled, Disabled
Description
Displays the current status of Intel Processor AES-NI feature.
Example:
A:>syscfg --AesNi=Enabled
AesNi=Enabled
Applicable Systems PowerEdge 12G and later systems
IntelTxt/inteltxt
Table 200. IntelTxt/inteltxt
Valid Arguments
● On systems prior to 12G: enable, disable
● On 12G and later systems: On, Off
Description
Turns the Trusted Execution Technology on or off. To enable Intel TXT, VT must be
enabled, and the TPM must be enabled with pre-boot measurements and activated.
Example:
A:>syscfg --inteltxt=enable
inteltxt=enable
NOTE: To enable the Intel TXT option in a supported processor, make sure that
the:
● Virtualization technology in Processor setting is enabled.
● TPM module is installed and initialed as OK by BIOS.
● TPM security in System security is set to on with pre-boot measurements.
SYSCFG 97