Deployment Guide

Table 192. EnergyEfficientTurbo (continued)
Example:
A:>syscfg --EnergyEfficientTurbo=Enabled
EnergyEfficientTurbo=Enabled
Applicable Systems Dell’s 13th generation PowerEdge and later systems
Proc n TurboCoreNum
Table 193. Proc n TurboCoreNum
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: All, 1, 2, 4, 6, 8, 10, 12,
14, 16, 18
Description
Sets the number of Turbos Boost-enabled cores for a processor. By default, the
maximum number of cores per processor is enabled.
NOTE: The value of n in ProcnTurboCoreNum can be 0–3.
Example:
A:>syscfg --Proc1TurboCoreNum=6
Proc1TurboCoreNum=6
Table 193. Proc n TurboCoreNum
Applicable Systems On Dell’s 13th generation PowerEdge and later systems
EnergyPerformanceBias
Table 194. EnergyPerformanceBias
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: MaxPower,
BalancedPerformance, BalancedEfficiency, LowPower
Description
Sets the Energy Efficient Policy. The CPU uses this setting to control the internal
behavior of the processor and to determine whether to target higher performance or
better power savings.
Example:
A:>syscfg --EnergyPerformanceBias=MaxPower
Applicable Systems Dell’s 13th generation PowerEdge and later systems
UncoreFrequency
Table 195. UncoreFrequency
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: DynamicUFS, MaxUFS,
MinUFS
SYSCFG 95