Deployment Guide

SataPortJModel*
Table 164. SataPortJModel
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the drive model of the selected device.
Example:
A:>syscfg --SataPortJModel
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SecurityFreezeLock
Table 165. SecurityFreezeLock
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
Sends the Security Freeze Lock command to the embedded SATA drives during
power-on self-test (POST). The option is applicable only to ATA and AHCI, and not
to RAID.
Example:
A:>syscfg --SecurityFreezeLock=Enabled
SecurityFreezeLock=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
Serial Communication
You can manage the serial port settings using the options in this group.
ConTermType / conterm
Table 166. ConTermType / conterm
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: vt100, ansi
● On Dell’s 12th generation PowerEdge and later systems: Vt100, Vt220, Ansi
Description
Sets the console terminal type. On some systems, vt100 may also set the terminal
type to vt220. This option is available on all supported systems that support console
redirection. This option can be replicated.
Example:
A:>syscfg --conterm=vt100
conterm=vt100
Applicable Systems All PowerEdge systems
SYSCFG 85