Deployment Guide

SataPortC / Sata2
Table 133. SataPortC / Sata2
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: auto, off
● On Dell’s 12th generation PowerEdge and later systems: Off, Auto
Description
Turns the SATA port 2 to auto or off. This option can be replicated.
Example:
A:>syscfg --sata2=auto
sata2=auto
Applicable Systems All PowerEdge systems
SataPortCCapacity*
Table 134. SataPortCCapacity
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the total capacity of a hard disk drive. This option is undefined for
removable-media devices such as optical drives.
Example:
A:>syscfg --SataPortCCapacity
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortCDriveType*
Table 135. SataPortCDriveType
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Indicates the type of device attached to the SATA port.
Example:
A:>syscfg --SataPortCDriveType
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SataPortCModel*
Table 136. SataPortCModel
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the drive model of the selected device.
76 SYSCFG