Deployment Guide

Proc n ControlledTurbo
Table 117. Proc n ControlledTurbo
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: enable, disable
● On Dell’s 13th generation PowerEdge and later systems: Disabled,
ControlledTurboLimit, ControlledTurboLimitMinus1, ControlledTurboLimitMinus2,
ControlledTurboLimitMinus3
Description
Controls the turbo engagement. Enable this option only if SysProfile is set to
PerfOptimized.
NOTE: The value of n in ProcnControlledTurbo can be 1–4.
Example:
A:>syscfg --Proc1ControlledTurbo=Disabled
Table 117. Proc n ControlledTurbo
Applicable Systems On Dell’s 13th generation PowerEdge and later systems
ProcConfigTdp
Table 118. ProcConfigTdp
Valid Arguments
● On systems prior to Dell’s 13th generation PowerEdge systems: NA
● On Dell’s 13th generation PowerEdge and later systems: Nominal, Level1, Level2
Description
Configures the Thermal Design Power (TDP).
Example:
A:>syscfg --ProcConfigTdp=Nominal
ProcConfigTdp=Nominal
Table 118. ProcConfigTdp
Applicable Systems On Dell’s 13th generation PowerEdge systems and later systems.
ProcX2Apic
Table 119. ProcX2Apic
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
Description
Enables or disables the x2APIC mode.
Example:
A:>syscfg --ProcX2Apic=Enabled
ProcX2Apic=Enabled
Applicable Systems Dell’s 12th generation PowerEdge and later systems
SATA Settings
You can manage the BIOS SATA settings using the options in this group.
SYSCFG
71