Deployment Guide

Table 108. ProcBusSpeed (continued)
Description
Displays the bus speed of the processor.
Example:
A:>syscfg --ProcBusSpeed
Applicable Systems Dell’s 12th generation PowerEdge and later systems.
ProcCores/cpucore
Table 109. ProcCores/cpucore
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: 1, 2, 4, 6, 8, 10,
12, 14, 16, all
● On Dell’s 12th generation PowerEdge and later systems: single, all, dual, quad, 1,
2, 4, 6, 8, 10, 12, 14, 16, 18
Description
Controls the number of enabled cores in each processor. The default value is set to
the maximum number of cores per processor. The number of cores depends on the
processor. Reading the cpucore that is set to the highest value of number of cores
displays as all.
For example, if six-core CPU is installed, after setting to the highest value, 6, when
you read the cpucore, it displays as all.
Example:
A:>syscfg --cpucore=1
cpucore=1
Applicable Systems All PowerEdge systems.
ProcCoreSpeed*
Table 110. ProcCoreSpeed
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: NA
● On Dell’s 12th generation PowerEdge and later systems: Read-only
Description
Displays the clock speed of the processors.
Example:
A:>syscfg --ProcCoreSpeed
Applicable Systems Dell’s 12th generation PowerEdge and later systems.
ProcExecuteDisable/cpuxdsupport
Table 111. ProcExecuteDisable / cpuxdsupport
Valid Arguments
● On systems prior to Dell’s 12th generation PowerEdge systems: enable, disable
● On Dell’s 12th generation PowerEdge and later systems: Enabled, Disabled
68 SYSCFG