Deployment Guide

Table 61. NodeInterleave/nodeinterleave (continued)
Example:
A:>syscfg --nodeinterleave=enable
nodeinterleave=enable
Applicable Systems All PowerEdge systems.
redmem
Table 62. redmem
Valid Arguments off, spare, mirror, DDDC
Description
Allows selection of the required redundant memory mode, or disables redundant
memory. This option can be replicated.
Example:
A:>syscfg --redmem=off
redmem=off
Applicable Systems PowerEdge systems with Intel Xeon 7500 series processor
SerialDbgOut
Table 63. SerialDbgOut
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: Enabled, Disabled
Description
Enables or disables the RC/MRC Serial debug output.
Example:
A:>syscfg --SerialDbgOut=Enabled
SerialDbgOut=Enabled
Applicable Systems PowerEdge 12G and later systems.
SysMemSize/mem*
Table 64. SysMemSize/mem*
Valid Arguments
● On systems prior to 12G: read-only
● On 12G and later systems: read-only
Description
Displays the amount of main memory in the system.
Example:
A:>syscfg --mem
mem=500
52 SYSCFG