Deployment Guide

Table 47. Usb3Setting (continued)
● Auto — USB ports operate at USB 2.0 speed.
● Enabled — USB ports operates at USB 3.0 speed.
● Disabled — USB 3.0 host controller is disabled and the speed is set to USB
2.0.
Example:
A:>syscfg --Usb3Setting=Auto
Usb3Setting=Auto
Applicable Systems
All systems prior to PowerEdge 13G systems
CurrentEmbVideoState
Table 48. CurrentEmbVideoState
Valid Arguments
● On systems prior to 12G: NA
● On 12G and later systems: read-only
Description
Displays the current state of the Embedded Video Controller.
Example:
A:>syscfg --CurrentEmbVideoState
CurrentEmbVideoState=xxx
Applicable Systems PowerEdge 12G and later systems
InternalSdCardPrimaryCard
Table 49. InternalSdCardPrimaryCard
Valid Arguments
● On systems prior to 13G: NA
● On 13G and later systems: SdCard1, SdCard2
Description
Sets an internal SD card as the primary SD card.
A:>syscfg --InternalSdCardPrimaryCard=SdCard1
InternalSdCardPrimaryCard=SdCard1
Table 49. InternalSdCardPrimaryCard
Applicable Systems PowerEdge 13G and later systems
Network Settings
You can manage the system network settings using the options in this group.
PxeDev n EnDis
Table 50. PxeDev
n EnDis
Valid Arguments
● On systems prior to 12G: NA
SYSCFG 47