Deployment Guide

Table 10. SYSCFG General — ix or inxmlfile (continued)
option is dependent on any other option, they are applied in the order in which they
appear in the xml file.
NOTE: It is applicable only on 12G and later systems.
Example:
A:>syscfg --ix filename.xml
NOTE: You can modify or use the BIOS configuration captured in xml format
from a PowerEdge server for large scale deployment configurations using
RACADM or WS-MAN. For more information on using RACADM and WS-MAN
refer Integrated Dell Remote Access Controller 8 (iDRAC8) RACADM Command
Line Interface Reference Guide and Dell Lifecycle Controller-Remote Services
Quick Start Guide respectively available at dell.com/support/manuals.
l or logfile
Table 11. SYSCFG General — l or logfile
Valid Arguments <filename>
Description Logs the command line output to a time-stamped file. The utility either appends the
information to an existing log file or creates a new file. The log file contains the same
information as the standard output, plus timestamp information. Users should use
this option instead of redirection for task diagnosis. For more information, see Log
Files .
Example:
A:>syscfg -l logfile --option=<filename>
o or outfile
Table 12. SYSCFG General — o or outfile
Valid Arguments <filename>
Description
Prints all replicable options to the specified filename. The format of the output is
in the .ini format, with the utility name as the section header. On PowerEdge 11G
systems, if a file with the same name already exists, the information is appended to
the file, but on PowerEdge 12G it overwrites the existing file. If this option is used
with other function commands, the commands are applied in the order in which they
appear. This option captures replicable BMC and BIOS options.
Example:
A:>syscfg -o <filename>.ini
ox or outxmlfile
Table 13. SYSCFG General — ox or outxmlfile
Valid Arguments <filename>
Description
Prints all BIOS options to the specified xml file.
22 SYSCFG