Deployment Guide

Table 355. RAIDCFG Error Codes and Messages (continued)
Error Code Message
141 The controller was not able to get the status of the specified mirror
set.
142 The controller was not able to set the requested failover space.
143 The controller cannot get the failover space information.
144 Controller cannot unmirror the specified virtual disk.
145 The controller could not split the specified virtual disk.
146 The controller could not lock the specified virtual disk.
147 Controller IO paused.
148 No controller parameter support.
149 Controller does not recognize parameter symbol.
150 Controller Battery Recondition failed.
151 Controller Get disk signature failed.
152 Controller Read Flags failed.
153 Controller Set Flags failed.
154 Controller Remove Snap Shot failed.
155 Controller not supported.
156 Controller device initialization failure.
157 Partner controller already opened readwrite.
158 No partner controller found.
159 The virtual disk is not valid for requested operation.
160 Cannot communicate with controller.
161 Set operation failed.
162 Operation to update error count of SMART device has failed.
163 Operation to clear error count of SMART device has failed.
164 Driver could not execute.
165 Cannot delete virtual disk.
166 Cannot set temperature probe. Invalid value entered.
167 Cannot set enclosure tag. Invalid value entered.
168 Cannot set enclosure alarm.
169 Temperature probe value out of range.
170 Cannot set cache mode.
172 Data will be lost on the secondary disk and a reboot will be forced.
173 Cluster Services (MSCS) is running. Deleting a virtual disk that
contains a cluster resource can result in unpredictable errors or
system hangs (quorum disk). You should shut down cluster services before
deleting cluster resources. Are you sure you want to proceed?
174
Cannot perform Create Virtual Disk or Delete Virtual Disk while the
other server in a cluster is online. Please shut one of the servers down
and retry the operation.
Messages And Codes 215